Linear weigh fillers
Good for moderate outputs, multiple products and controlled dry product dosing.
View routeProduct route
Wood pellet weigh fillers
Weigh and bag pellet products with equipment matched to flow, dust and target bag weight.
Planning the right weigh filling route
Wood pellets and similar products can flow readily but may generate dust or break down during handling. The feed and discharge route should reduce unnecessary degradation.
Bagging by weight may use weigh hoppers, linear weighers or semi-automatic bagging equipment depending on output and pack size.
The line should be planned around product feed, bag support, sealing and finished pack handling.
Key buying checks
- Review dust generation and product degradation.
- Confirm target bag size and filled pack handling.
- Check hopper and chute angles for steady flow.
- Plan sealing and collection after filling.
Routes to compare
Machine options to shortlist.
Pellet bagging routes should control dust and maintain stable flow to the weighing system.
Multihead weighers
Useful where speed, accuracy and product combination are central to the project.
View routeAuger fillers
Often compared for powders, fine ingredients and products that need screw dosing.
View routeVFFS weigh lines
For automatic bag forming, weighing, filling and sealing from film reels.
View routeRelated searches
Useful pages for the same project.
These pages help narrow the specification by product, pack format and machine type.
How to choose a weigh filler
A practical guide to comparing machine type, pack handling, output and tolerance.
Read moreLinear vs multihead vs auger
Compare the main weighing and dosing routes for dry products.
Read moreWeigh filler enquiry checklist
Prepare the information needed before requesting a machine recommendation.
Read moreFAQ
Questions before choosing a weigh filler.
Short answers for production teams comparing dry-product weighing and filling routes.
What information is needed for wood pellet weigh fillers?
Useful details include the product name, bulk density if known, target fill weight, acceptable tolerance, pack format, output per minute or hour and whether the line must connect to feeding, sealing, capping, labelling or checkweighing equipment.
Which machine type is normally compared for wood pellet weigh fillers?
Linear weighers, multihead weighers and auger fillers may all be considered depending on product flow, dose size and output target.
Can Lancing help with a complete line rather than a standalone filler?
Yes. Many projects involve product feed, weighing, filling, pack handling, sealing or closing and downstream checking. Sending the full pack route helps avoid choosing a filler that later becomes difficult to integrate.
Send the product, target weight, pack format and output target.
Lancing can advise whether a linear weigher, multihead weigher, auger filler, VFFS line or integrated route is the practical starting point.