Linear weigh fillers
Good for moderate outputs, multiple products and controlled dry product dosing.
View routeProduct route
Adhesive granule weigh fillers
Weigh and pack adhesive granules, pellets and industrial dry products with suitable product handling.
Planning the right weigh filling route
Adhesive granules and similar industrial products may flow well but can be sensitive to temperature, static or contamination. Product feed and pack handling should be reviewed carefully.
Linear weighers, weigh hoppers and bagging routes can be compared depending on target weight and output.
The line design should also consider whether packs are tubs, bags, jars or pouches and how they are closed after filling.
Key buying checks
- Check static, clumping or temperature sensitivity.
- Confirm target weights and pack opening.
- Review contact materials and cleaning.
- Plan downstream closure and labelling.
Routes to compare
Machine options to shortlist.
Industrial granule filling should match product handling to pack and line requirements.
Multihead weighers
Useful where speed, accuracy and product combination are central to the project.
View routeAuger fillers
Often compared for powders, fine ingredients and products that need screw dosing.
View routeVFFS weigh lines
For automatic bag forming, weighing, filling and sealing from film reels.
View routeRelated searches
Useful pages for the same project.
These pages help narrow the specification by product, pack format and machine type.
How to choose a weigh filler
A practical guide to comparing machine type, pack handling, output and tolerance.
Read moreLinear vs multihead vs auger
Compare the main weighing and dosing routes for dry products.
Read moreWeigh filler enquiry checklist
Prepare the information needed before requesting a machine recommendation.
Read moreFAQ
Questions before choosing a weigh filler.
Short answers for production teams comparing dry-product weighing and filling routes.
What information is needed for adhesive granule weigh fillers?
Useful details include the product name, bulk density if known, target fill weight, acceptable tolerance, pack format, output per minute or hour and whether the line must connect to feeding, sealing, capping, labelling or checkweighing equipment.
Which machine type is normally compared for adhesive granule weigh fillers?
Linear weighers, multihead weighers and auger fillers may all be considered depending on product flow, dose size and output target.
Can Lancing help with a complete line rather than a standalone filler?
Yes. Many projects involve product feed, weighing, filling, pack handling, sealing or closing and downstream checking. Sending the full pack route helps avoid choosing a filler that later becomes difficult to integrate.
Send the product, target weight, pack format and output target.
Lancing can advise whether a linear weigher, multihead weigher, auger filler, VFFS line or integrated route is the practical starting point.