Linear weigh fillers
Good for moderate outputs, multiple products and controlled dry product dosing.
View routeIndustry route
Weigh fillers for hardware and fastener packers
Pack fasteners and small components by weight using robust feeding and pack handling routes.
Planning the right weigh filling route
Hardware and fastener packers often compare weighing against counting. Weight filling can be practical when the commercial pack is sold by weight or when piece count tolerance is acceptable.
The filler must handle product edges, noise, wear and consistent feed into the weigh bucket or pack.
Bag, tub, jar and pouch routes can all be considered depending on pack size and presentation.
Key buying checks
- Compare weighing versus counting requirement.
- Review product wear and sharp edges.
- Confirm target pack weight and pack opening.
- Plan robust feed and discharge parts.
Routes to compare
Machine options to shortlist.
Hardware packing requires robust feed control and a clear decision between weight and count.
Multihead weighers
Useful where speed, accuracy and product combination are central to the project.
View routeAuger fillers
Often compared for powders, fine ingredients and products that need screw dosing.
View routeVFFS weigh lines
For automatic bag forming, weighing, filling and sealing from film reels.
View routeRelated searches
Useful pages for the same project.
These pages help narrow the specification by product, pack format and machine type.
How to choose a weigh filler
A practical guide to comparing machine type, pack handling, output and tolerance.
Read moreLinear vs multihead vs auger
Compare the main weighing and dosing routes for dry products.
Read moreWeigh filler enquiry checklist
Prepare the information needed before requesting a machine recommendation.
Read moreFAQ
Questions before choosing a weigh filler.
Short answers for production teams comparing dry-product weighing and filling routes.
What information is needed for weigh fillers for hardware and fastener packers?
Useful details include the product name, bulk density if known, target fill weight, acceptable tolerance, pack format, output per minute or hour and whether the line must connect to feeding, sealing, capping, labelling or checkweighing equipment.
Which machine type is normally compared for weigh fillers for hardware and fastener packers?
Linear weighers, multihead weighers and auger fillers may all be considered depending on product flow, dose size and output target.
Can Lancing help with a complete line rather than a standalone filler?
Yes. Many projects involve product feed, weighing, filling, pack handling, sealing or closing and downstream checking. Sending the full pack route helps avoid choosing a filler that later becomes difficult to integrate.
Send the product, target weight, pack format and output target.
Lancing can advise whether a linear weigher, multihead weigher, auger filler, VFFS line or integrated route is the practical starting point.