Linear weigh fillers
Good for moderate outputs, multiple products and controlled dry product dosing.
View routeVibratory dosing
Vibratory feeder weigh fillers
Use vibratory feeding to control dry product flow into a weighing system or pack.
Planning the right weigh filling route
Vibratory feeders are widely used to deliver dry products into weigh buckets or directly into packs. They can provide a fast bulk feed and a slower fine feed near target weight.
They work best with products that can be controlled by vibration without excessive dusting, bouncing or breakage. Product trials are useful where flow is uncertain.
The feeder design, tray length, product bed depth and target tolerance all affect performance.
Key buying checks
- Check if product responds consistently to vibration.
- Use bulk and fine feed control near target.
- Review tray cleaning and removable contact parts.
- Match discharge to the weigh hopper or pack.
Routes to compare
Machine options to shortlist.
Vibratory feed control can improve weighing performance for many granules and small dry products.
Multihead weighers
Useful where speed, accuracy and product combination are central to the project.
View routeAuger fillers
Often compared for powders, fine ingredients and products that need screw dosing.
View routeVFFS weigh lines
For automatic bag forming, weighing, filling and sealing from film reels.
View routeRelated searches
Useful pages for the same project.
These pages help narrow the specification by product, pack format and machine type.
FAQ
Questions before choosing a weigh filler.
Short answers for production teams comparing dry-product weighing and filling routes.
What information is needed for vibratory feeder weigh fillers?
Useful details include the product name, bulk density if known, target fill weight, acceptable tolerance, pack format, output per minute or hour and whether the line must connect to feeding, sealing, capping, labelling or checkweighing equipment.
Which machine type is normally compared for vibratory feeder weigh fillers?
Linear weighers, multihead weighers and auger fillers may all be considered depending on product flow, dose size and output target.
Can Lancing help with a complete line rather than a standalone filler?
Yes. Many projects involve product feed, weighing, filling, pack handling, sealing or closing and downstream checking. Sending the full pack route helps avoid choosing a filler that later becomes difficult to integrate.
Send the product, target weight, pack format and output target.
Lancing can advise whether a linear weigher, multihead weigher, auger filler, VFFS line or integrated route is the practical starting point.