Linear vs multihead vs auger
Compare the core machine routes used for dry-product dosing and filling.
Open pageComparison
Multihead weighers vs auger fillers for granules
Compare two common dry-product filling routes before asking for a quotation.
Start with the product and pack.
The choice between multihead weighers and auger fillers for granules should be made around the product, target weight and pack handling route. Free-flowing granules often suit weighing; augers may be compared where the material behaves more like a powder.
A useful comparison looks at accuracy, output, product damage, cleaning, changeover and how the equipment connects to feeding, sealing, capping or checkweighing. The cheapest machine is not always the lowest-cost route if it creates product giveaway or difficult changeovers.
Lancing can help narrow the shortlist before a quotation is prepared, using the product sample, dose range, target throughput and available floor space as the starting point.
Specification checks
- Compare the product flow into the feeder and hopper, not just the final pack format.
- Check the target weight range and the accuracy or tolerance needed on finished packs.
- Review operator loading, product feed, discharge height and cleaning requirements.
- Allow for future products and pack sizes before the final machine layout is chosen.
Related routes
Useful pages for the same enquiry.
Compare the machine type, pack format and product handling route before asking for a quotation.
How to choose a weigh filler
A practical buyer guide for selecting the right filling route.
Open pageEnquiry checklist
Prepare the key details before asking for a recommendation.
Open pageLinear weigh fillers
Compare controlled weighing for free-flowing dry products, moderate outputs and flexible pack formats.
Open pageMultihead weighers
Compare higher-speed portion weighing for snacks, pet food, coffee, granules and mixed products.
Open pageAuger fillers
Compare screw dosing for fine powders, dusty products and products that need hopper agitation.
Open pageFAQ
Questions before choosing a weigh filler.
Short answers for buyers comparing dry-product filling equipment.
Which is better: multihead weighers or auger fillers for granules?
Neither is automatically better. The right route depends on product behaviour, dose size, output target, budget and how much automation is needed.
Can both routes be quoted?
Yes. For uncertain projects it is often useful to compare two routes before choosing a final specification.
What details make the comparison faster?
Product name, bulk density if known, target fill weights, tolerance, pack type, output target and photos of the pack are the most useful starting points.
Send the product, target weight, pack format and output target.
Lancing can advise whether a linear weigher, multihead weigher, auger filler, VFFS line or integrated route is the practical starting point.